Selleys Roof & Gutter Ezi Press is easy to use – simply press the lever to apply – no caulking gun required. It provides a superior waterproof seal and excellent UV and weather resistance. Ideal for roofing, guttering and flashing outside the home.
Best for: Aluminum, Sheet Metal, Copper, Brass, Galvanized Metals, Rigid PVC and most plastics including polystyrene, Terracotta, Concrete, Glazed tiles, Blue-scope Steel decorative sheet metals such as Lysaght Zincalume and COLOR-BOND
No caulking gun required
Easy to hold and use
Superior waterproof seal
100% silicone – resists cracking, crumbling or peeling away
UV and weather resistant
Precision application for the best finish
- Metal and tile roofing
- Color-bond roofs and fences
- Guttering and flashing
- Skylights
- Around air conditioning units
- Aluminum
- Sheet Metal
- Copper
- Brass
- Galvanized Metals
- Rigid PVC and most plastics including polystyrene
- Terracotta
- Concrete
- Glazed tiles
- Blue-scope Steel decorative sheet metals such as Lysaght Zincalume and COLOR-BOND
Use in a well ventilated are. Avoid contact with skin and eyes.
- Throughly clean and dry surface from oil, dirt and grease with mineral turps.
- Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
- Smooth with a spatula dipped in soapy water. Clean up before sealant skins (5-10 minutes) with a cloth dampened in mineral turps. Twist collar back to MIN and replace nozzle cap
- Sealant will fully cure in 72 hours
Limitations:
- Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
- Do not use in below ground applications.
- Sealant is not paintable. Complete painting 7d prior to applying sealant.
- Covers up to 4m, depending on bead size/shape
- For a neat finish and easy clean up, tape both sides of the gap before applying the product.
- Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.
- When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
- For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
- Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures.
Size: 100g Aerosal
Technology: Neutral Cure Silicone
Use: Interior, Exterior
- Uncured product may be removed with mineral turps.
- Cured product can be removed with Selleys Silicone Remover or by cutting and scraping.